Examples of using Master volume control in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Increase the master volume control on the RSP-1098 until the meter reads 75dB(+5dB on the meter scale)
zone control, or even as a master volume control for the system.
a Volume control for each output channel, and a Master volume control that adjusts the level of the ToneMatch output sent to the power stand.
hold down the Mode button until the left-most LED around the Master Volume Control flashes.
Amps of this era didn't have any sort of master volume control, so to get this sound you would have to crank your“Mark III Super Amp” to max- just the thing to help you really make friends with the neighbors.
If it is desired to have the meter affected by the master volume control, it can be changed using a PC via the RS232 port.
control configuration consisting of a volume and">tone control for each pickup as well as a master volume control, and Fender's traditional six-on-a-side tuning pegs.
Check that MASTER VOLUME control is not set at-∞ dB.
Master volume controls for each control are included.
Set the MASTER VOLUME control(2) to the desired volume. .
Readjust the volume with the MASTER VOLUME control, if required.
Adjust the volume level of the source with the MASTER VOLUME control.
Master volume controls the summed output level of the Safari.
Two Master Volume controls for additional boost capabilities.
Turn the MASTER VOLUME control(5) to zero.
The output level of the jack depends on the MASTER VOLUME control(2), however, not on the tone controls BASS and TREBLE 1.
Always set the MASTER VOLUME control fully to the left before starting to play the audio source.
The MASTER VOLUME CONTROL determines the level of audio which is sent to these outputs.
MASTER VOLUME Control- Use this to control the overall level of the amplifier,
as it is not altered by the MASTER VOLUME CONTROL.