Examples of using Operating mode switch in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Operating mode: Switch the machine on and off at one key.
Manual setting is only possible if the operating mode switch(fig. 6c)
Turn the operating mode switch 5 to position«Hammer»(Fig.5), and then turn
Overload Reset: Switch operating mode switch to“OFF” and remove some of the connected electrical load ie:
Check setting of operating mode switches 1 and 2.
the level set automatically is lost and the operating mode switches to manual distillation.
With the operating mode selector switch 10, select the operating mode of the machine.
The“Mode” switch selects the operating mode.
Select the desired operating mode with the switch MODE 10.
Select the desired operating mode with the switch STEREO/ PARALLEL/ BRIDGE 12.
Has the correct operating mode been selected with the switch OPERATING MODE(9)?
verify the desired switch operating mode The switch module is shipped with Access Gateway Mode enabled.
This is normal when the Operating Mode Switch No correction is required.
Operating Mode Switch should be in the OFF position.
Operating Mode Switch: controls Inverter/Charger operation.
Operating Mode Switch is set to“OFF”
Reset by moving Operating Mode Switch to“OFF.”.
Operating mode switch controls inverter operation.
Operating mode switch(3), operating state LED(4), power switch 2.
This setting also allows operation of the Redundant Operating Mode Switch mounted on the top panel of select models CHARGE ONLY.