Examples of using Sensor unit in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The sensor unit only weights 21g- that is about the weight of a large bite of apple!
The remote thermo-hygro sensor unit uses two(2)
The sensor unit is made in such a way that it is always on the surface
specifications apply to a gas flow sensor unit that is a buscontrolled standalone device inside the wire feeder.
The thermo sensor unit will automatically transmit temperature signal to the main unit after batteries inserted.
It is recommended to affix the sensor unit directly on window
Located at the back of the sensor unit, inside the battery compartment.
On the body of the sensor unit there is a fastener to which the cord or rod of the rod is fastened.
The units are connected by a cable, which is supplied with the sensor unit.
The low battery icon“” will appear at particular channel indicating that thermo sensor unit of the channel is in low battery status.
The clock automatically starts scanning the RF 433MHz signal to register new thermo sensor unit after new batteries inserted.
Detects a range of gases with a Single-gas Detector by replacing the Sensor Unit.
Spring couplings are unnecessary since there is no mechanical connection between the shaft and the sensor unit.
Insert the bottom of the wind sensor unit into the wind vane securely with some.
The gas flow sensor unit supports flow measurement for any mixture of the six base gases, including pure base gases.
METPOINT MMA Sensor unit for O2, SO2,
insert terminal block together with sensor unit into mounting plate,
Push the sensor knob in the direction of arrow 1 to disengage its claw(Or unlock the sensor unit), and then adjust the sensor unit to a desired paper remaining position within the range shown by arrow 2.
contact lens solution to wet the two electrode areas on the sensor unit.
A motion detection or sensor unit can be used to send a signal to the DVR to begin camera viewing