Examples of using Soap solution in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Fill the bottle halfway up with a warm water and soap solution.
Therefore you will be able to kill more of them with the soap solution.
Using a soft toothbrush gently scrub the capsule with soap solution 3.
Moisten the connections listed above with the soap solution.
You may also use isopropyl alcohol or a soap solution.
Apply the liquid leak detector or the soap solution around all connections from the shut-off valve to the cooktop.
and a mixture of soap solution, fruit nectar- these are only few recipes from the experienced buyers.
Apply the soap solution to all visible/accessible gas connections including the connection of the gas regulator to the gas cylinder.
Apply liquid soap solution sparingly(one drop is sufficient) to inside diameter of rubber rotating member.
Disposable liquid gas canister, soap solution and a cloth or brush to apply the solution. .
Look for bubbles or blowing in the soap solution which indicate that a leak is present.
Apply the liquid leak detector or the soap solution around all connections from the shut-off valve to the cooktop.
This should be done with a soap solution watching for bubbles on all exposed connections,
The housing of the Repeater Pro should be cleaned using a moist cloth diluted soap solution.
The soap solution can be applied to hoses
Check all air line fittings and connections/piping for air leaks by applying a soap solution.
mild soap solution.
Rinse the sensor with water and return to the soap solution for 2 to 3 minutes to neutralize any remaining acid.
mild soap solution.
check once again using the soap solution.