Examples of using Speed controller in English and their translations into Spanish
{-}
-
Colloquial
-
Official
The speed controller can be installed directly on the DIN rail.
Adjust the speed controller to increase the speed. .
Cause- Speed controller is at its limit for too long time.
Cruising speed controller: This controller may be.
Select the desired speed using the speed controller.
Connect the speed controller to the receiver. pic 18.
Turn the speed controller 2 in a clockwise direction to increase the speed. .
Turn the speed controller 2 in an anticlockwise direction to reduce the speed. .
Switch the appliance on by turning the speed controller 4 to the right.
See also section Speed controller tuning on page 58.
Total 9 flow rates for option on the Speed COntroller.
Should I install the battery to the fan or speed controller?
Code Parameter---- Display of speed controller status.
Maximum sewing speed can be freely set by the speed controller.
The chainsaw will stop immediately once the speed controller is released.
Adjust the speed with the speed controller if more power is required.
INTEGRATION TIME Defines an integration time for the speed controller.
GAIN Defines a relative gain for the speed controller.
Dynamic speed error depends on speed controller tuning.
DERIVATION TIME Defines the derivation time for the speed controller.