Examples of using Starting torque in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Always use the original auxiliary handle so that kickback forces or the starting torque can be mastered in the best possible way.
It provides a high starting torque even at low speed
The high starting torque of the motor helps to prevent the cutter from getting stuck.
Grasp the motor firmly to resist starting torque and move the switch button to the"ON" position.
The voltage ramp can not hold back the motor starting torque this results in a current peak
For star delta starting the starting current and starting torque will be approximately one third of the direct-on-line values.
Full use is made of the generous ratio between starting torque and rated torque. .
at low frequencies and is used to obtain a higher starting torque.
high starting torque, and high volumetric
When such a motor is connected directly to the line voltage it will typically draw a starting current of about 5 to 8 times its nominal current while the resulting starting torque will be about 0.5 to 1.5 times its nominal torque. .
tool damage, grasp router firmly to resist starting torque and make sure bit is clear of workpiece
high efficiency, energy saving, large starting torque, easy operation& servicing etc.
Some single phase AC motors- especially in the higher power range- need an additional starting capacitor to reach a starting torque of 150- 200% of the rated torque. .
8 42.08 START TORQ REF Defines the motor starting torque at brake release if parameter 42.07 has value PAR 40.28.
With high starting torque DC servo motor
a second ring of 6-12 washers at a sub-diameter made for a significant improvement in starting torque without compromising efficiency.
with 331/3 rpm S/N Ratio More than 55dB(DIN-B) Pitch Controls+/- 10% Starting Torque More than 1 kgf. cm Braking System Electronic brake Starting Time Less than 1 sec.
S Start torque at brake release Parameter 42.07 and 42.08.
Low starting torques even at really low temperatures.
small start torque;