Examples of using Inductor in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
With increasing power inductor and smoothing capacitors battery increases the quality of the resulting weld.
The inductor was wound around a 8 X 32 bolt(about 3/16 diameter)
The end result is an inductor(also known as an air core coil)
The inductor is made by winding 8 turns of 24 insulated solid copper wire on a 5 mm screwdriver.
This inductor is not too important
The Q Zone Fixed Wah features the red Fasel inductor for a sweet sound available on-stage at every opportunity.
The pedal's inductor fits closer in to the original VOX wah inductors,
The GCB-95F comes loaded with the legendary Fasel inductor, which instantly gives you the sound of the classic 60s wahs that are considered the holy grail of wah tone.
This innovative new pedal also includes a true bypass and fasel inductor for added versatility.
still this can vary by the type of inductor.
The oscillator is a Colpitts stage, frequency of oscillation governed by the tank circuit made from two 5pF ceramic capacitors and the L2 inductor.
lower by slightly expanding or compressing the inductor.
Magnet wire(Radio Shack part 278-1345) was used to build the inductor but you can use standard solid strand 22 AWG gauge copper wire.
the legendary Fasel inductor, is back!
If tuning by variable capacitor is needed, it should be done with a third capacitor connected in parallel to the inductor or in series as in the Clapp oscillator.
The series peaking inductor L_2 also resonate with the total parasitic capacitances C_d2 and C_d3 at the drain of M_2 and M_3.
Variable capacitors C1, C2, with inductor L1, constitute the circuit of co-ordination,
Inductor L2 is a radio-frequency shunt that decouples power
With the increase in battery capacity smoothing capacitors and inductor power increases the quality of the welding.
On the rear wall of the control unit housing there is a connection for connecting a vacuum tube, an inductor cable, a power cord and a power switch.