Examples of using Multimeter in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
the capacitors look damaged, test each one with a multimeter set to resistance.
For further tests you need a voltmeter or multimeter- although you can make a rough check with a test lamp and leads.
They use the multimeter to measure the current that drawn by the electric fan with
Although your multimeter is capable of providing quantitative values of measured resistance, it is also useful for qualitative tests of continuity: whether or not there is
A multimeter is a handy tool that you use to measure electricity,
measure small currents-or voltage or resistance(very little current flows through the multimeter when measuring voltage
Digital multimeter is the the best electronic tool preferred by the professional technicians used for measuring lots of electrical parameters like voltage, current, capacitance, resistance, continuity and temperature.
One of the ways of checking for a short circuit is by using a multimeter, which will show very little resistance between the two wires when there is a short circuit between them.
You might be confused by all the symbols on the front of your multimeter, especially if you don't actually see words like"voltage,""current," and"resistance" spelled out anywhere.
There's a lot going on when you look at the selection knob on a multimeter, but if you're only going to be doing some basic stuff, you won't even use half of all the settings.
Using a multimeter at the main circuit breaker, check the incoming
For that matter, it is of crucial importance to select multimeter test leads that are safe and built from quality materials
The multimeter will beep if there is a conductive path between the two probe tips(meaning,
There's really not one single multimeter that you should shoot for, and it really depends
check with a multimeter at the output of solar panels is normal, reverse, correct treatment based on the test results.
The DT4281 and DT4282 deliver the fastest response speed of any portable multimeter, improving the response time for DC measurement from previous models' 1.5 seconds to 1.0 seconds.
Using a Multimeter at the Main Circuit Breaker check the incoming voltage from Phase-to-Phase noting each of these values so they can be compared to values taken later.
Start by turning on your multimeter, plugging the probes into their respective ports and then setting the selection knob to
Before deciding which kind of digital multimeter may work best for your project, it's important to understand the wide range of functions that multimeters can perform.
get you started and familiar with using a multimeter.