Examples of using Pressure switch in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
When the pressure of the storage tank is reduced to 0.5-- 0.6mpa, the pressure switch automatically joins up.
of gas flow and is controlled by a pressure switch in the chamber.
The pressure switch featured here is an old type,
On some machines if the pressure switch doesn't reset, it keeps the door lock energized.
When the pressure of the gas tank drops to 0.5--0.6MPa, the pressure switch is automatically connected and started.
The pressure switch will stop the motor once the basketball or the whole stand is completely lifted.
Plastic Pressure Switch May 19 2019 Pressure switch is a simple pressure control device.
internal diaphragm which triggers one or more switches(depending on the type of pressure switch).
When the pressure in the air store tank decreases to 0.5~0.6MPa, the pressure switch will start automatically.
This custom wire assemblies applied for automotive pressure switch system to FAN, RELAY parts.
How often a pressure switch is activated will have a direct impact on its service life, system downtime and the overhaul schedule.
Home> Products> Automotive Wire Harness> wire assembly for automotive pressure switch system.
If you will be able to provide the pressure switch that meets the following criteria, then you are on your way
Easily installation YCK-P5/SG-A Differential pressure switch is used in the dual line centralized lubrication system with the nominal pressure up to 40Mpa to control directional valve or monitoring the lubrication[…].
The AW-B series has a maximum set pressure of 125 psi and offers embedded gauge and pressure switch options not found in the AW-A while maintaining panel mounting interchangeability with the previous AW models.
Other machines incorporate a pressure switch mechanism and automatically use the correct amount of water, and many have a half load facility for small quantities of laundry.
We choice the well-renowned international pressure switch supplier Danfoss, their pressure switches are used for regulating, monitoring
Thermal overload relay, Control fuse, Air pressure switch, Timer switch, Flame sensor,
In choosing a pressure switch, one could select a single switch for each switch point or a single switch capable of handling
excess of 80-100 psi, an emergency pressure relief valve may be needed, just in case the pressure switch fails in the“on” position.