Examples of using Power switch in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
TP+ is connected to the positive end of the battery through the power switch.
with control buttons, power switch, microUSB socket
The infrared remote controller is configured, thus the brightness and power switch can be adjusted away from the machine.
Roll Forming Machine should turn off the power switch, completely cut off the machine power; .
Power switch and LED positioned for easy access and high visibility.
If there is power switch in the USB device,
Home page to open the power switch, manually operate the various functions are normal;
Easy to control power switch with an operational PC and wireless buttons: speedy, convenient.
It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.
Two level controls, power switch, power LED,
Power switch operation's problem Make sure press the power switch for 5 seconds or longer.
Press and hold the power switch for 2 seconds to turn on the aircraft,
The front of the battery backup will usually have a power switch to turn the device on and off and will also sometimes have one
Sometimes when you have a computer black screen on startup and the power switch light will be green and then turns to orange or amber.
Low voltage alarm: while you turn on the power switch of the metal detector but hear continuous alarm,
The only buttons you will find on the top of the camera are the power switch, shutter-release button, and movie-record button so you will have an
When you leave kettles, toasters, T. V's, radios, bedside lamps etc sitting all day with their power switch on, this is actually using power. .
User just turns the Smart Privacy Glass Film“on” for transparent glass and“off” for opaque glass in a within one second by a power switch.
have an NFC-enabled phone, first make sure that the headphones are turned on by sliding the three-position power switch to the middle position.
you can save money by soldering the motor, 9 V battery snap, power switch, and m&m's tube LEDs wires directly to the board.