Examples of using Pressure-sensitive in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
HTC's new pressure-sensitive buttons are one of the worst ideas for a smartphone ever.
Pressure-sensitive adhesive(PSA) backing surface is standard,
Pressure-sensitive adhesive(PSA) backing surface is standard,
Being pressure-sensitive they can also have a very flat low-frequency response down to 20 Hz or below.
PE foam tape is High-tack, pressure-sensitive acrylic adhesive on strip of PE foam.
This varying degree of conductivity makes the buttons pressure-sensitive(meaning pushing the button harder does have some merit to it)!
This superoxide is a pressure-sensitive explosive that will detonate when scratched.
Leading pressure-sensitive label producers such as Avery Dennison became major consumers of direct thermal paper for label applications.
D Touch: The iPhone 8 Plus' screen is pressure-sensitive, and has a feature called 3D Touch.
is a great phone, with the exception of two fatal flaws, which are the pressure-sensitive buttons and Edge Sense.
M VHB tape 4945 is a firm double-sided, pressure-sensitive, closed-cell acrylic foam tape.
like the raster tools, can be configured to be pen pressure-sensitive.
Culpan says that Force Touch is coming to the iPhone at least two years after Apple began working with suppliers to perfect a pressure-sensitive display.
have an HD display, support for multi-touch input, and a“real pressure-sensitive professional pen.”.
It includes the pressure-sensitive 3D Touch layer that buzzes slightly when you press and hold the screen.
other non-critical applications where a pressure-sensitive tape is needed.
A very reliable analyst predicts one of the iPhones coming in autumn won't have this pressure-sensitive technology, and none of the 2019 devices will.
Its stickiness is created by a pressure-sensitive adhesive, or PSA, which is a soft polymer blend that employs van der Waals forces to attract two surfaces.
on a flexible polyester backing, one side coated with a pressure-sensitive adhesive(to make it peel-and-stick).[2].
Pressure-sensitive or other adhesives adhere the splice to the roll and the cohesive failure of the splice then