Voorbeelden van het gebruik van The powder coating in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Because the powder coating is dirt-resistant, you don't end up with dirty hands during use.
galvanized the powder coating, galvanized then PVC coated.
A key feature of the Weidemann quality standard is the powder coating, which offers excellent corrosion protection.
Pre-heating of MDF before powder coting is sprayed and the drying of the powder coating hereinafter.
The powder coating gives the semi-manufactured
Square meters/ kg, thickness 60 microns(100% of the powder coating utilization rate).
silver leaf finish give Frequency an attractive look, the powder coating a contemporary flavor.
in the Nordic countries, and it enables the powder coating of components that weigh as much as a thousand kilogrammes.
lowers the carbon footprint of the entire manufacturing process, but the powder coatings themselves are also much less toxic to application operators and end-customers alike, when compared to liquid paints.
This will maintain the quality of the powder coating.
wipe clean and treat the powder coating.
The powder coating of our products is much more than just a paint booth.
However, total cost of painting is reduced by 25% due to higher efficiency of the powder coating system.
as well as producing the necessary roughness for the powder coating.
A medium wave infrared oven from Heraeus Noblelight is helping Hawes Signs to achieve significant increases in production line speed in the powder coating of aluminium and steel panels.
Describes the powder coating process and its advantages,
A coating thicker coatings can be obtained, for example, applying a coating of 100~ 300μm, with an ordinary solvent-free coatings, the coating is about 4 to 6 times, and then the powder coating can be achieved once the thickness of the. .
Delivery is now available within just one week from the receipt of the powder coatings order- a significant reduction from the traditional six to eight weeks.