Примери за използване на Original signal на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The solid line below shows the magnitude of frequencies in the combined original plus the delayed original signal with no change in pitch.
Parameter identification 0x01 is the reverb time(the time the original signal decays by -60 dB).
rather than decaying after the original signal, builds up to the original signal.
A signal is also an original sound while noise is a random sound added to the original signal.
The following is the result of running the original signal through a Shroeder all pass filter with a delay of 3.7 ms(7 samples)
The HDMI splitter only splits the original signal, which is shown on all of the connected devices.
The amplitude envelope will be computed from the root of the sum of the squared values of the signal after the Hilbert transform and the original signal.
then the delay will produce the following output from the impulse signal above(including the original signal).
For example, both the box and slider for the left channel delay in the example dialog above control the left channel delay amount- the difference in time between the original signal and the delayed signal in the left channel.
Consequently, all the original signals for the engine management
All the original signals from the engine management
The delayed signal has the same amplitude as the original signal.
The delayed signals are then mixed back in with the original signal.
First, I need the A.M. number in the original signal from Weeks and Edwards.
That is, you can adjust the mix between the original signal and the chorus signal. .
The output of this effect is the combined original signal and the new repeated signal. .
Distortion is a change of the original signal, wheresa noise is an external random signal added to the original signal.
Although this noise was not particularly evident in the original signal, it has been accentuated in the derivative.
The alternative would be to get 1000 points of the original signal, which will not produce such nice curves.
We can do either, but running the original signal creates an output that is easier to understand