Примери за използване на Treated surface на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The quality of the treated surface and the convenience of work in this case is out of the question.
The treated surface should be protected from mechanical influences
A thin layer of foam hardly increases the thickness of the treated surface, and its insulating properties are much higher as compared with conventional insulators.
the minimum size of the treated surface is required.
Avoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.
Therefore, treated surface should not be left in wet weather and outdoors for a long time.
This will ensure a concise impact of the funds on the treated surface, and not on the entire area.
without stopping to warm up the adjacent strip of the treated surface.
The constant abrasive effect on the treated surface significantly reduces the duration of the coating,
Due to the thinnest diameter of the water jet, the treated surface practically does not emit waste.
If necessary, put the plane aside to check the treated surface, it is important to lay it on its side.
After a few minutes the liquid has penetrated and the treated surface is ready for further action.
straight to the sawing itself is often a sign corresponding to the treated surface-«CUT» or«for Wood».
The optical features of nanoceramic particles ensure the appearance of the treated surface is identical to that after polishing.
Due to the treated surface deep oxidants can be used for transportation
general anesthesia- it depends on the area of the treated surface.
minor injury to the treated surface, which epithelizes in few days.
Moreover, successful coating of zinc silicate primer- ZSP is possible when treated surface is not completely dry.
The drug contains a microencapsulated insecticide, so it reliably etches cockroaches that simply crawl over the treated surface(insecticide particles adhere to the legs and body of the insect).
after its application, the treated surface should be covered with a sterile cloth.