英語 での Control lines の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Further, the control lines and information lines represent those that are considered to be necessary for the description, and represent not all control lines and information lines that are necessary for a product.
A few Linux programs will monitor the modem control lines and indicate if they are positive(1) or negative(0).
If UR-ADDRx does not match with any one of UTOPIA port addresses, this signal will be tri-stated at the chip level using the control lines detailed below.
As in a VCO module, the devices are configured to form a complete VCO, requiring only connection to the power supply, ground, output, tuning input, and any digital control lines.
The Atmel AT29LV512 flash chip, for example, requires 15 address lines, eight data lines, and three control lines when interfaced with a host microcontroller.
Send line and accept line three lines(asynchronous transmission), you can also add other control lines to complete synchronization and other functions.
Isolated SIE through an SPI interface. A third approach: If the microprocessor's SIE uses an external transceiver, the data and control lines to the transceiver can be isolated Figure 4.
If we want to make an array of thousands or millions of qubits so close together, it means that all the control lines, the control electronics, and the readout devices must also be fabricated at that nanometric scale, and with that pitch and that density of electrodes.
Although the receive and transmit pins are inverted logic, other pins(modem control lines) are normal logic with a positive voltage being true(or"on" or"asserted") and a negative voltage being false(or"off" or"negated").
It ensures that the bidirectional data and control lines achieve valid logic levels, and it prevents excessive current flow from the primary battery to the modem hardware and from the secondary battery to the primary battery and the electronics.
Whereas conventional PCI utilized common address, data and control lines, the point to point topology of PCIe provides separate links to each connected device, freeing each from the potential constraints of the others.
You can simplify software development and gain more time to design the electronics hardware if, instead of manual coding, you use TINA's Flowchart editor and debugger to generate and debug the MCU code, using just symbols and flow control lines, and then run or debug this code in digital or mixed circuit environment.
Only control line appears(C).
Surge and lightning shock of signal line or control line.
Control line Red 12V;Black GND;White-;Yellow+.
Conductive coupling of signal line or control line(auto parts).
Weaker or darker than that of the control line.
Control line falls to appear.
INVALID: Control line falls to appear.
One colored band appears in control line zone.