英語 での Crystal oscillator の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
STORY1Downsizing and stabilization of crystal oscillators→ Development of the tuning fork crystal oscillator.
The generated electricity drives the IC and crystal oscillator, and the crystal oscillator makes a highly accurate time reference.
Its surface is aluminum, layer coated on the crystal oscillator refill tube with very small.
Crystal oscillator is used in conjunction with the phase-locked loop circuit to provide the system required clock frequency.
Also external was the 19.2MHz temperature compensated crystal oscillator which provides the PLL reference frequency.
The device also includes a fully monolithic VCO and tank circuit as well as a complete frequency synthesizer including an on-chip crystal oscillator and output buffer/divider.
A crystal oscillator is a electromechanical device, it's also an electronic oscillator circuit.
Ideally, the sampling clock crystal oscillator should be referenced to the analog ground plane in a split-ground system.
The MAX3580's crystal oscillator operates over a wide range of frequencies, so that a frequency acceptable to the demodulator clock can be selected.
The MAX2164 has monolithic VCOs, a complete frequency synthesizer, and an on-chip crystal oscillator with output buffer.
The MAX2163 also includes fully monolithic VCOs as well as a complete frequency synthesizer including an on-chip crystal oscillator and output buffer.
In case of using Crystal Oscillator, it is required the circuit matching with IC.
Additionally, an on-chip crystal oscillator is provided along with a buffered output for driving additional tuners and demodulators.
An integrated digitally controlled crystal oscillator provides more than±50ppm control range, eliminating the need for a VCXO.
In 2009 year: Introduction of Japan automatic SMD crystal oscillator production line-- SMD production line.
The devices contain a low noise amplifier(LNA), a double balanced mixer, a fully integrated VCO, a PLL Synthesizer and a crystal oscillator.
The 38kHz multiplex signal and 19kHz pilot tone are derived by dividing down the 7.6MHz crystal oscillator located at pins 13& 14.
In 2011 year: Set up branch factory in Tianshui, Gansu, add crystal oscillator production line.
To enhance sound reproducibility, a crystal oscillator for a master clock with superior phase noise characteristics(i.e., low jitter) is necessary.
To realize highly accurate time measurement, it was equipped with a newly developed crystal oscillator of 512,000 Hz.