英語 での Power indicator の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Power Indicator, Start Button and the Emergency Stop Button are in the door board of the box.
The power indicator light in the battery power is low, low power indicator flashing red, low power can be set.
The power indicator will glow white, and the Bluetooth connect button(above the UE LOGO) will blink white rapidly.
One is used as a power indicator while the other one is used on pin 13 on the board.
The power indicator light doesn't flash and the key doesn't react.
One-click switching between Windows/ Mac dual system, IPX4 waterproof, symmetrical design, power indicator.
Contact the nail dust collector and power with the adapter, the power indicator will turn on.
Power indicator LED lights is more than 85%, four lights all over power decline gradually extinguished.
A power indicator can be seen along with 2 built-in speakers and a dust cover.
The power indicator light bar design makes you see the power data CLEARLY, more practical.
Reseat it by aligning the“Anypro” logo and power indicator in a straight line.
N/A The PI-30 RF power indicator is used to measure the RF level of signal sources in the 1 to 30 MHz range.
Check if the bicycle's power indicator is normal, if it is normal, run it normally.
Simple and clear 10 LED battery power indicator ensures carefree traveling.
When connect AC Power, the lamp will not be lighting, Charging Indicator and AC Power Indicator will be lighting.
Get ready of the power, and press the power button, then the power indicator is lightened.
Note: Rechargeable batteries can be used, but will alter the accuracy of the battery power indicator.
(1) Power indicator light- When the remote roadblock needs to perform the interception task, turn on the power switch in the remote control box, and the power indicator light is on.
The main elements are mounted onto an isolated plate, and the universal switch, power indicator light, starting button and emergency stop button are fixed on the panel.
The power indicator will glow white, the Bluetooth® connect button(above the power button) will blink white rapidly, and you will hear a tone indicating the speaker is ready to pair.