英語 での Resistor の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The mixer also has an off-chip bias resistor.
YAGEO resistor and TDK MLCC are top brand components which could ensure the long lifespan and the high performance of the led lamps.
Table 3 shows the resistor colour codes but we also recommend that you use a digital multimeter to check the values.
Search/ filter on the'R' of Resistor.
The resistor coils ON/OFF cycle is plotted in red, while the power-emission trend of the device appears in blue.
GLPN pulsed green lasers are ideal for applications in the solar/photovoltaic arena, resistor trimming and marking of transparent materials.
ROHM was founded in 1958 as a resistor manufacturer, but today semiconductor devices account for 80% of our revenue.
Metal film leaded precision resistor, excellent stability and tight tolerance, extremely low TCR, high power is available for telecommunication and medical equipment.
Thin film high precision resistor array, very accurate resistor network for tight tolerance, Low TCR with high tech thin film technology.
After removing the remainder of the strip under the coax, the longer end is bent and soldered to the strip near the resistor.
To place another resistor, simply click where you want the resistor to appear.
This resistor is used to set the high voltage generated by the clock.
Because the waveforms are voltages developed across a short, very low-inductance film resistor, they closely represent the switch-current waveforms.
Two 39Ω series resistors and a 56W shunt resistor form the attenuator and this reduces the signal level into the antenna.
This thick fim resistor paste DZ4301A15 is fired at 850℃.
The ceramic shell and resistor of the product is combined by filling epoxy.
This resistor pulls Q1′s collector high when the transistor is off.
Resistor shall be tested at AC potential respectively for 60 seconds.(See table-1).
By using an external overcurrent detection resistor, the S-8269B Series realizes high-accuracy overcurrent protection with less effect from temperature change.
Even tighter output tolerances achievable with external resistor selection/trimming?