英語 での The compressed air の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
It is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny durst and solid particles.
After the compressed air oil products the amount is controlled in an ideal range.
This not only saves on power consumption and improved control but also lowers the compressed air consumption.
Another possibility is cleaning the compressed air with a catalytic converter.
(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
The Compressed Air Source is a quiet, compact compressed air system that provides clean, oil- and moisture-free optical quality air to the laser system for air assisted laser processing and optics protection.
As the dry ice particles are only actually accelerated the length of the applicator by the compressed air, the dual hose system has a relatively small kinetic effect and offers a much less aggressive clean than single hose technology.
You can use hot water recovered from the compressed air system for sanitary purposes and space heating., but it is particularly suitable for process applications.
The compressed air meter can also be used to carry out a peak load analysis in order to determine whether you are generating compressed air of sufficient capacity.
By using blower fans to replace the compressed air previously used to dry the coil springs after the pre-coating treatment, electricity consumption has been cut by 70,000 kWh p. a.(37 tons of CO2).
POU1 supplies the compressed air without vibration and to lift up the heavy platter. It has a double hermetic structure that prevents vibration noise from leaking and keeps highly silent in your music room.
Because the compressed air coming out of the pump is a pulsating, it can be supplied as compressed air with no ripple and vibration by Π type filter.
When Maeda Shell Service measured the compressed air used for these tools, it detected more than 10,000 impurity particles at least 0.3 microns in size per liter. These impurities were determined to be the cause of the tool failures.
Typically, for this type of application, a competitor would dry the compressed air and then heat it using a diesel-fired burner box of some sort.
The compressed air supply to the nozzle or nozzles for atomising the salt solution shall be free of oil and dirt, and maintained at a pressure between 70 kN/m2 and 170 kN/m2.