英語 での Voltage drop の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Please ensure that you always use twisted cable, and use low-resistance cable with less voltage drop than the CT secondary current.
Under conditions in which a large current flows, conduction losses, that is, a voltage drop and heat generation, occur.
After repeated opening and closing tests without the Inrush Limiter, the inrush phenomenon showed an inrush current of 411 A, and voltage drop of 14.8%.
Now, we have developed reduced forward voltage drop(VF) for alternator diodes, which is in particularly strong demand among customers.
The voltage drop based on conductor temperature 90°C is on the high side calculated only for reference.
When battery voltage drop from 9V to 7V, the detecting distance remain unchanged.
Notice that since the gate current is zero, a zero voltage drop exists across RG.
Voltage drop on luminaire wired furthest from the central battery could become a problem.
Assuming a voltage drop of 0.5V, the power dissipation of a double Schottky diode would be 5W at a 10A load current.
If operated at 100μA, for example, the voltage drop is far below the specified threshold.
Or 16 gauge wire to minimize the voltage drop over long cable distances.
On-resistance should be chosen so that the voltage drop at the rated current is approximately the same as the current-sense voltage. .
When a finger touches the screen and draws a minute amount of current to the point of contact, creating a voltage drop.
VDD voltage drop(VDET3) detection and automatically switches to the backup battery.
The voltage drop across RDSON due to the load current subtracts from the headroom of the active portion of the pass element.
Power Noise Impact on Timing Dynamic voltage drop in a design has the potential to impact clock jitter, critical paths and timing.
The sense resistor is, therefore, chosen to ensure that the voltage drop across it is between 50mV and 150mV at maximum current.
Typical voltage drop is 43mV at 500mA, with the voltage drop increasing linearly at higher currents.
Of course, if you make the load cable"thicker and shorter", the voltage drop will decrease, which further increases Vce.
The measurement technique accuracy relies on properly measuring the voltage drop across an external sense resistor.