CONNECTING ROD - 한국어로 번역

[kə'nektiŋ rɒd]
[kə'nektiŋ rɒd]
연결대
connecting rod
넥 팅 로드
connecting rod
로드 를 연결
connecting rod
연결봉
connecting rods

영어에서 Connecting rod 을 사용하는 예와 한국어로 번역

{-}
  • Colloquial category close
  • Ecclesiastic category close
  • Ecclesiastic category close
  • Programming category close
  • Computer category close
Crankshaft, connecting rod, crosshead member is pressure lubricated(splash lubrication), to ensure the reliability of lubrication.
크랭크 축, 커넥팅로드, 크로스 헤드 부재는 윤활의 신뢰성을 보장하기 위해 압력 윤활 (스플래시 윤활)입니다.
all kinds of connecting rod, the rod of the welding,
넥팅로드의 모든 종류,
The machine adopt cylinder, crank, connecting rod, synchronizing shaft achieve molding synchronously.
실린더, 크랭크, 커넥팅 로드, 기계 채택 동기적으로 성형 달성 샤프트를 동기화.
The connecting rod is divided into high pressure and low pressure, the high voltage of the bipolar piston machine and the low pressure of the low level piston machine.
넥팅로드는 고압 및 저압 바이폴라 피스톤 기계의 높은 전압과 상기 로우 레벨 피스톤 기계의 저압으로 분할된다.
The pairing and fitting direction of the connecting rod shaft and the cover cannot be damaged.
넥팅로드 축 커버의 페어링 및 끼워 맞춤 방향이 손상 될 수 없다.
Generally, the matching marks are placed on the same side of the connecting rod shaft.2.
일반적으로, 매칭 마크는 커넥팅로드 shaft.2의 동일 측에 배치된다.
Thus, the weight of the engine decreases despite increased capacity and the connecting rod and the piston shafts are halved.
따라서, 엔진의 중량을 증가 용량과 커넥팅로드 감소에도 불구하고, 피스톤 샤프트가 반감된다.
The connecting rod transfers the linear movement from the pistons to rotate the crankshaft.
넥팅 로드는 피스톤에서 직선 운동을 전달하여 크랭크축을 회전시킵니다.
drive the flywheel and the clutch drives the gear, crankshaft(or eccentric gear), connecting rod, etc.
크랭크 샤프트 (또는 편심 기어), 커넥팅로드 등을 구동합니다.
Double-cylinders, four-columns, self-balancing connecting rod which can maintain equal pressure of each position.
더블 실린더, 4 열, 각 위치의 동일한 압력을 유지할 수있는 자동 밸런싱 커넥팅로드.
Connecting Rod Bearing Bush Automobile Engine Parts 5348887 For Foton/ Cummins ISF 2.8.
부시 자동차 엔진을 품는 연결대는 Foton/Cummins ISF 2.8를 위해 5348887를 분해합니다.
adopts double oil cylinder, double-crank connecting rod balance, four-columns, which can guarantee the cutting depth at every cutting position is the same.
더블 크랭크 연결 막대 균형, 모든 절단 위치에서 절단 깊이 동일을 보장할 수 있는 4 열을 채택 한다.
Yellow Zinc Coated Automobile Casting Parts, Forged Steel/ Cast Iron Brake Connecting Rod.
노란 아연은 자동차 던지는 부속, 위조한 강철/무쇠 브레이크 연결대를 입혔습니다.
The door shaft and the connecting rod mechanism is improved,
문 샤프트, 커넥팅 로드 메커니즘 향상,
Shape optimization of a connecting rod Non Parametric Shape Optimization OptiStructâ€TMs proprietary technique automatically generates shape variables and determines optimal shape contours based on design requirements.
연결봉 형상 최적화 비 파라메트릭 형상 최적화 옵티스트럭트는 고유 기술을 이용하여 자동으로 형상 변수를 생성하고 설계 요구 사항에 따라 최적의 형상 윤곽을 결정합니다.
The piston group is driven by the connecting rod to make a reciprocating linear motion in the cylinder, thereby forming a variable working volume together with the cylinder
피스톤 그룹은 커넥팅로드에 의해 구동되어 실린더 내에서 왕복 직선 운동을하므로 실린더와 함께 가변 작업량을 형성하여 흡입,
He used the crankshaft with a connecting rod in two of his water-raising machines: the crank-driven saqiya chain pump
그는 크랭크축과 연결봉을 그의 2가지 종류의 물펌프, 크랭크 기반 사키야
Like the contact probes for measurements in two dimensions along the part axis, M110 can be fitted with special dynamic tracking probes to measure eccentric sections such as connecting rod pins in crankshafts.
소재 축을 따라 2 차원으로 측정하는 접촉식 프로브와 마찬가지로 M110에는 특수 동적 트래킹 프로브를 장착하여 크랭크 샤프트의 커넥팅로드 핀과 같은 편심 섹션을 측정할 수 있습니다.
It is necessary to provide counterweights for the reciprocating mass of each piston and connecting rod to improve balance in engines, and these are typically
그것은 각 피스톤의 왕복 질량과 엔진의 균형을 개선하기 위해 연결로드에 대한 평형 추를 제공하기 위해 필요하며,
by rotating worm gear, worm gear mounted on the end face of the eccentric shaft, the crank connecting rod to drive the piston up and down reciprocating motion.
웜 기어는 상기 편심 샤프트의 단면에 장착 된 크랭크 커넥팅로드가 왕복 운동을 상하로 피스톤을 구동한다.
결과: 81, 시각: 0.0439

단어 번역에 의한 워드

최고 사전 질의

영어 - 한국어