Exemples d'utilisation de Linear interpolation en Anglais et leurs traductions en Français
{-}
-
Official
-
Colloquial
giving linear interpolation with sharp corner.
vessel uses linear interpolation between the elevations of the two water level stations in use.
As the tables show corrections to the nearest 1.0 C, linear interpolation must be used to determine the correction when the temperature is not a whole number.
By linear interpolation of Nokia's 2-year CDSs(38 bps)
The achievement percentage is calculated at between 30% and 100% by linear interpolation if the average of the 2018
The reference CPI applicable to any other day in a month is calculated by linear interpolation between the reference CPI applicable to the first day of such month and the reference CPI
the error of linear interpolation u{\displaystyle\textstyle u}
i.e. in between two adjacent grid points the relative luminous intensity requirement is calculated by linear interpolation using the two adjacent grid points.
This parameter amounts to(0.50)% at 2.43 years and(0.45)% at 3.43 years calculated by linear interpolation between the 3-month averages of 2-, 3- and 4-year French government bonds.
Built-in 100kHz and 20kHz pulse outputs for two axes each Four built-in channels with a pulse output of max. 50kHz allow for simultaneous 2-axis linear interpolation of two sets.
shall be calculated by linear interpolation between the two adjacent values.
starting from true north, and by linear interpolation for radials in between.
in 2 axes(radius max. 999 m), optional additional linear interpolation in the third axis.
Water Level Interpolation The Draught Information System shall be able to calculate the accurate water level at Ship's Own Position based on a linear interpolation between the closest water level station(s) in the Seaway.
Some simulators estimate the time of collision by linear interpolation, roll back the simulation,
For 2-axis linear interpolation, the following methods are supported: E point control,
the coordinating points of which were calculated on composite bathymetric profiles using the method of linear interpolation of seabed depths, is shown on
An example of linear interpolation where an observed indicated temperature(26.50)
then Brent's method will usually proceed by either inverse quadratic or linear interpolation, in which case it will converge superlinearly.
so they were randomly subsampled from one in four pixels and then a linear interpolation was used to convert these data to the 0.5 grid.