Exemples d'utilisation de Time is displayed en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
When Clock mode is set to on, the time is displayed.
After approx. 30 seconds the time is displayed again.
For specifying the format in which the time is displayed.
When the radio is off, the time is displayed using the 24-hour clock
Beneath M(MIN), S(SEC) the track remain time is displayed.
Note: While the short-term timer is running, the time is displayed and the† symbol lights up continuously.
Above M(MIN), S(SEC) and F(FRAME) the track remain time is displayed.
When the ignition switch is in the ACC or ON position, the time is displayed.
a plot showing the dominance rate for each attribute plotted against time is displayed.
Below M(MIN), S(SEC) and F(FRAME) the track remain time is displayed.
The time is displayed on the front panel of my terminal,
When the ignition switch is in the ACC or ON position, the time is displayed.
the DCF symbol stays permanently visible and the time is displayed.
The screen used to set the time is displayed with the hour digits flashing.
The microwave oven automatically switches to standby mode and the time is displayed if no button is pressed for a long time. .
Playback Time Here the playback time is displayed in M(inutes), S(econds) and Frames.
INZONE”- The time is displayed in which your pulse was during training within the set pulse range.
The time is displayed in the 24-hour format.
To confirm the clock time When you press the CLOCK button, the clock time is displayed. Wait for a few seconds for the display to return to the original display. .
Only the time is displayed in sleep mode, so that you can also