误差 in English translation

• error
• mistakes
• inaccuracies
• errors
• mistake

Examples of using 误差 in Chinese and their translations into English

Cosh团队希望帮助NASA减小这些误差。
Cosh and his team are hoping to help NASA reduce the errors.

如何选择万用表各挡量程以及计算测量误差？?
What is rate measure and calculation of errors?

生成统计数据的过程也会产生误差。
Measurement processes that generate statistical data are also subject to error.

Coparmex周二公布的这项民意调查没有提供任何误差.
The poll, released by Coparmex on Tuesday, provided no margin of error.

但是那个洞没有误差的余地。
This hole has no room for error.

人口基金正在审查这些误差。
UNFPA is reviewing these discrepancies.

这种低幅度信号容易受误差影响。
This low amplitude signal is susceptible to errors.

统计误差.
Discrepancies in the statistics.

电子天平的重复性误差.
Electronic repetition of errors.

采用这个技术可大大地减小误差概率。
Using technology can also significantly reduce the likelihood of mistakes.

信号噪声通常会产生一到十米左右的误差。
Signal noise usually creates an error from around one to ten meters.

如果不及时进行调节，会使误差无法被及时发现。
Failure to perform timely reconciliations may result in the non-timely detection of errors.

那些较大零件的真实位置误差大约是25微米。
True position tolerances on these larger parts are about 25 microns.

这个差异显然已经超过了误差允许的范围。
This difference is clearly beyond the allowable range of errors.

(2)输入偏置电流引起的误差不能被消除。
(2) The error caused by inputing bias current cannot be eliminated.

但我们以同样的方式计算误差，所以该网络的输出是与不带噪声的原始输入进行比较。
We compute the error the same way though, so the output of the network is compared to the original input without noise.

MLP已经能够学习光谱，但均方根误差（RMSE）仍然高达0.3eV。
Already, the MLP is able to learn spectra, but the root mean square error(RMSE) is still as high as 0.3 eV.

于是Dmitro设计了一种独特的电脑程序(BESM-4)，使科学家能够更正电子设备的误差。
Dmitro developed a unique computer program(BESM-4) which enabled the scientist to compensate and correct mistakes of his electronic devices.

乌克兰审计院还将对任何误差、欺诈事项或必要的业务改进承担责任。
It would also accept responsibility for any inaccuracies, matters of fraud or necessary operational improvements.

通过误差分析，掌握其变化的基本规律，从而采取相应的措施减少加工误差，提高加工精度。
Through error analysis, grasp the basic laws of its changes, and take corresponding measures to reduce machining errors and improve machining accuracy.