Examples of using Scrap in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
construction site, scrap iron recycle station etc. Effectively suction the small iron,
frame is actually used, the material frame reciprocating screw moves under the driving of the torque motor, and the cut scrap is guided by the guide rod and wound on the material holder tray.
The scrap tire is shredded into proper tire chips and continuously to be fed into the reactor for the normal pressure low temperature pyrolysis together with the low temperature sulfur transfer catalyst through the hot sealed device.
In the global steelmaking raw materials markets, Turkey continued to pay higher prices for imported scrap in line with rising billet and finished steel prices, while scrap prices in the USA and Taiwan followed a simila….
Scrap metal briquette press can press various steel scraps, cast iron scraps, copper cuttings,
tissues, golf pencils and small pads of post-its or pads made from clean-cut scrap paper.
This small hole must be"tapped" with an old drill bit(or a scrap of 4 mm) by tilting it backwards(in the direction of the GE) to facilitate the entry of the feed tube.
even smaller, our bamboo bending process is very mature, scrap rate lower than 1%, this is what other factory can't do.
which can significantly improve the production efficiency and reduce the scrap rate.
has the stacking material, etc., which can effectively prevent the system from leaking the stamping process and reduce the scrap of the plate;
This scrap metal shear baler is capable of cold pressing various thin metal materials with the thickness less than 3mm into rectangular bales at normal state, such as waste steel, scrap iron, wire steel, etc.
Applicable for using in the medium and large scaled metal smelting factory, scrap metal recycling site and other places, this WSD-4000C Scrap Metal Shear Baler has been mainly exported to Russia,
reducing the corner scrap and reducing the waste of raw materials.
strip can be minimized, thereby effectively reducing the corner scrap Reduce the waste of raw materials.
the automatic feeding is realized, and the scrap is removed by the cutter,
After the scrap contacts the expansion and contraction cylinder,
but the standard heavy-duty material rack can also wind the scrap, but because it is passed through the sensor rack or Induction bar inductive control, open and close winding at the time of stop.
While polluting vehicles are on their way out, non-motorized transport is being enticed in: the City gives Parisians benefits worth up to €600 towards the purchase of a new bicycle or a public transport pass, or to join a car-sharing scheme- if they scrap their cars or motorbikes;
ferrous& non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper& aluminum, waste stainless steel, scrap from discarded automobiles)
ferrous& non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper& aluminum, waste stainless steel, scrap from discarded automobiles)