Examples of using Valves in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
pressure, vacuum, fan, and valves as allowed.
V410-15 Pneumatic solenoid valves are mounted on pneumatic actuators(referring to various cylinders), called valve cylinders, or combined cylinders.
For installations such as this a water manifold with ball or gate valves is recommend for flow control.
If the environmental space is limited, please use multi-function solenoid valve, because it eliminates the bypass and three manual valves and easy online maintenance.
Moreover, the structural and electromagnetic valves are reformed to solve the problem of low pressure in open air and compressed air.
If you are working with valves in a challenging processing environment and would like to know more about our Zirconia valve components, please contact us today.
Solenoid valves are used in fluid power pneumatic and hydraulic systems, to control cylinders, fluid power motors or larger industrial valves.
can be set for efficient agitation, stainless steel dispensing valves.
electric control valves all adopt imported components,
Some valves for the same gas dome are leaking, thus causing leakage for all the valves. Check the leakage.
elastic rubber handles, valves, pump.
Moreover, the structural and pulse valves are reformed to solve the problem of low pressure in the open air and compressed air sources.
To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect.
Once a year, check the temperature and pressure release valves(they are at the bottom of the geyser).
This series valves are offered NBR, VITON, EPDM, etc for Seals and diaphragm to provide
It takes a lot of time to find out the valves with ruptured diaphragms among hundreds of valves, and it takes a lot of time to check the valves one by one.
Coils for AKV and AKVA valves are specially designed for heavy-duty operation under the severe conditions of high humidity and temperature fluctuations typical of most refrigeration systems.
Solenoid valves must be installed vertically on the horizontal line with coils on top and refrigerant fluid flow must be aligned with arrows on the valve body.
In valvular regurgitation, the valves do not close properly or completely, and blood flows backwards or regurgitates.
The pulse bag filter dust blowing system with DMF-ZL-B pneumatic pulse jet valves.