Examples of using Serial data in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
The RS-232 serial data packet consists of a start bit, anywhere from 5 to 8 data bits, 1/1.5/2 stop bits, and a parity bit(Figure 2).
To save data onto tapes, we have to turn our serial data(to/from UART) into audio signals that a tape cassette drive can record.
要将数据保存到磁带上，我们必须转换我们的串行数据（来自UART）到磁带盒驱动器可以记录的音频信号。Serial data transfers are faster than parallel transfers.
并行数据传输比串行数据传输更快。Parallel data transmission is faster than serial data transmission.
并行数据传输比串行数据传输更快。Serial data enters and exits through RxD.
Mode 0: Serial data enters and exits through RXD.
模式0：串行数据通过RXD进出。FireWire or IEEE1394 is a bus standard for serial data transmission.
FireWire或IEEE1394是串行数据传输的总线标准。The master then transmits one or more bytes of serial data.
然后主设备发送一个或多个串行数据字节。Mode 0: Serial data enters and exits through RXD.
模式0:通过RXD实现连续数据的进入和退出。Bias and 1/3 bias drive schemes can be controlled from serial data.
可以通过串行数据控制1/2偏置和1/3偏置驱动方案。It means that one byte in serial data stream may consist of 11 bits.
这意味着串行数据流中的一个字节可能包含11位。Analyzing and triggering this serial data is usually much more difficult than parallel data. .
分析和触发这种串行数据通常比并行数据要困难得多。Higher transmission speed of serial data, limited only by computer performance and network speed.
串行数据传输速度更高，仅受计算机性能和网络速度的限制.Data moving to or from a computer, in most cases, moves as serial data.
在大多数情况下移动到或来自计算机的数据作为串行数据移动。One is serial data(SDA) line and second is serial clock(SCL) line.
一根为串行数据线（SerialDataLine，SDA），另一根为串行时钟线（SerialClockLine，SCL）。Serial data I/O supports'computer control bus' format communication with the system controller.
串行数据I/O支持与系统进行“计算机控制总线”格式通信。Learn more about serial data loggers in this article which covers both software and hardware tools.
了解有关串行数据记录器的更多信息本文它涵盖了软件和硬件工具。Modern high speed design and serial data make many people urgently need a portable high performance oscilloscope.
现代的高速设计和串行数据使许多人迫切需要一款便携式高性能示波器。Find out how easy it is to transfer JESD204 high speed serial data over a fiber-optic link.
了解如何利用光纤链路轻松传输JESD204高速串行数据。The two lines are the SDA(Serial Data Line) and the SCL(Serial Clock Line).
这两条线是SDA（串行数据）和SCL（串行时钟）。
