Examples of using Rated current in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
start-up of low-voltage power-supply distribution system RO NETWORK-GENERATOR, rated current 1000A, TRANSMITTERS
The rated current and voltage(AC or DC) required for the specific application must be
If the current on low voltage side exceeds the rated current, the instrument will take shut-down protection,
start-up of low-voltage power-supply distribution system GRO ELEKTRIKA 2, rated current 2*1250A, LURA, Zagreb Plant.
G5 series basic micro switch control power can be as low as 15gf and rated current to 26a, which is suitable for high power devices.
If the current on low voltage side exceeds the rated current, the instrument will take shut-down protection,
In accordance with the rules of the RCD is selected bysensitivity(10-30 mA) and the rated current, which is determined depending on the total capacity of all electrical appliances.
enclosure to IP 53 reduce the rated current by approximately 30.
The socket for connecting each such user must withstand the rated current of at least 16 amps(for the same current has to be calculated and the circuit breaker).
The contact resistance test method can also be used to check the continuity of the circuit by means of the rated voltage and rated current specified in the specification.
It is a switch that automatically disconnects when the current exceeds the rated current in the circuit.
in the case of exceeding the rated current of the fuse.
increase the rated current and voltage, reduce the operating force
We must select the appropriate switch in the selection guide according to the rated current, operating load,
This requires a large micro switch with a rated current of 20A or 25A at 125VAC or 250VAC.
If the current on low voltage side exceeds the rated current, the instrument will take shut-down protection,
the current is adjusted to the rated current.
from -25° to 155°C, and high rated current of 16A.
Since the rated current is much lower than that of AB-breaker,
This model is for rated current 630A and below, with comparatively simple structure.