Examples of using To the router in English and their translations into Czech
{-}
-
Colloquial
-
Official
You can set controls on a master level that apply to all devices connected to the router or to individual devices.
wireless devices that are connected to the router.
HOW DO I CONFIGURE MY GO-RT-AC750 ROUTER MANUALLY?- Connect your PC to the router using an Ethernet cable.
Wireless devices must send a request to the router, and receive an IP address in response so they can function on the network.
In order to prevent damage to the router and other terminal equipment the supply must always be disconnected upon connecting
Unauthorized modifications or the use of unapproved accessories may result in damage to the router and/ or a breach of applicable regulations.
TxD is the input to the router according to the RS 232 standard.
which makes it unnecessary to connect to the router; So you can control RF elements without any network
You can also find the Wi-Fi network name and password on the label attached to the router.
it sends packets to the router with the longest prefix match in the source address.
OR WIRELESS ENCRYPTION KEY?- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the correct Wireless Network Name(SSID)
as described in“Connecting the Router Physically” below, or wireless, as described in“Connecting to the Router Wirelessly(WD SSID)” on page 15.
you can use the following steps to assign a fixed IP address to the router.
Device Name Name assigned to the router.
MAC Address Unique identification number assigned to the router by the manufacturer.
Verify Firewall accessing remotely to the router's Web interface.
Adjustable guide to be adapted to the router size.
Connect an Ethernet cable from the modem to the router's WAN port.
Make sure the storage device is properly connected to the router's USB port.