SOLDERED in Danish translation

Examples of using Soldered in English and their translations into Danish

Style/topic:

In 1945-46, the ear to the medal was soldered, and the shoe was made of heavy metal.

I 1945-46 blev øret til medaljen loddet, og skoen var lavet af tungmetal.

the LPF inductors are soldered directly to the tabs of the metal clad capacitors.

er LPF spoler loddes direkte til fanerne i metal klædte kondensatorer.

the ends are soldered together with an alloy mix.

enderne er loddet sammen med en legering mix.

Smooth soldered joints employing palm information

Glatte loddede samlinger beskæftiger palme information

This must be soldered very quickly otherwise the plastic insulation between the plates will melt or buckle.

Dette skal loddes meget hurtigt ellers plastik isolering mellem pladerne vil smelte eller spænde.

Another choice can be two straightened-out coat hangers soldered together and then cut to 5 feet.

Et andet valg kan være to udrettet bøjler loddet sammen og derefter skåret til 5 fødder.

Must be soldered to the white LED strip or soldered to the wires on the white outdoor LED strip.

Skal loddes på det hvide LED bånd eller loddes på ledningerne på det hvide udendørs LED bånd.

This PCB is fitted with soldered shields all around and between stages,

Dette PCB er udstyret med loddede skjolde rundt

then it is soldered with a large number of solutions.

så er det loddet med et stort antal løsninger.

should be soldered to the coil you made,

bør loddes til spolen er foretaget,

For round soldered pin contacts,

For loddede rundstik-stiftkontakter, Ford,

The Lampshade is made with a stained glass real glass, soldered with Tin Louis Comfort Tiffany method.

Lampeskærm er lavet med en farvet glas ægte glas, loddet med Tin Louis Comfort Tiffany metode.

Any enamel on the leads where the coils are to be soldered must be sanded,

Enhver emalje på fører, hvor spolerne skal loddes skal slibes,

Career Skills Qualification Smooth soldered joints employing palm information

Karriere Skills Kvalifikation Glatte loddede samlinger beskæftiger palme information

The solder pin S version is easily soldered to the PC board,

Lodde pin S version er nemt loddes til PC bord,

representing a glowing cord made of PVC with soldered LEDs inside.

der repræsenterer en glødende snor lavet af PVC med loddede lysdioder indeni.

with one end soldered to the antenna terminal.

med den ene ende loddes til antenneterminalen.

Next, a straight piece wire was wound around this 1/4 inch snippet six times and then soldered on the prototyping board.

Dernæst blev et lige stykke wire viklet omkring denne 1/ 4 tommer snippet seks gange og derefter loddes på prototyping bord.

they should be soldered again.

skal de loddes igen.

This is the negative terminal and must be soldered down the negative hole on the board.

Dette er den negative terminal og skal loddes ned i negative hul på tavlen.