Examples of using Learn button in English and their translations into French
{-}
-
Colloquial
-
Official
Programming can be done through the door control or the learn button on the garage door opener.
Repeat the steps 3-4 above with the yellow button on the remote control and the receiver Smart/Learn button“B” to program the CLOSE mode;
Press and release the LEARN button on your product For LCD.
Press learning button(22) on drive mechanism/receiver and hold down.
Press and release the LEARN button on either operator.
Press and hold the LEARN button LED will light.
Press and release the LEARN button on the second operator.
Locate the LEARN button on your product or the PROGRAM button on.
Press and release the LEARN button LED will light.
Press the LEARN button to begin the cloning process.
Press and release the LEARN Button on the garage door opener.
Press and release the Program/LEARN button on your product.
Keep the LEARN button pressed down for 5 seconds the LEDs flash for a short time.
Time for SECURITY+2.0 product Yellow LEARN button.
D9: press the LEARN button on the thermostat once.
Press and release the LEARN button.
Press the LEARN button in the interior of the siren.
release the operator's LEARN button.
Leave the LEARN mode by pressing the LEARN button again.
Press the LEARN button once again.