Examples of using Length and width in English and their translations into French
{-}
-
Official
-
Colloquial
Length and width are of the same proportion,
The design is of indefinite length and width as shown by the broken lines around the perimeter of the reproduction.
The single-unit permissible length and width requirement for this class cannot be met.
Container of standard ISO length and width but with extra height- 9'6"(2.9 m) instead of 8' 2.44 m.
Be sure that the paper length and width guides rest securely against the paper.
The paper length and width guides must be adjusted to the paper size before.
Slot Length and Width You can specify the offset values for the length and width of slots.
Length and width of useful surface area(non-circular)
Denims with stretch in the fabric length and width for a fantastic 360-degree,"3D" fit.
This applies just as much to the length and width of the sheet as to the diameters of fixing holes.
The design is limited to the pattern on the Paper Towel of indefinite length and width as shown by the broken lines around the perimeter of the reproduction.
Platforms Various values by line category access, usable length and width, height, distance from track center, track layout, etc.
The diameter equals the average of the length and width of the rectangle that encloses all the sketch entities.
It's not magic- it's simply the smart combination of blade length and width, combined with a wavy edge
The sample's length and width should be at least as large as the dimensions of the sensing area.
Length and width of each trawl panel in sufficient detail to allow calculation of the angle of each panel with respect to water flow.
Once the evaporator is leveled(length and width), make sure the locking nuts are secured and tight.
The proportions between the length and width of the net may vary, both in the vertical and the horizontal direction.
Default settings of stitch length and width are underlined on the display.
The bags can be overlapped in both orientations(length and width) in order to achieve optimum product distribution in the box.