Examples of using Multiplus in English and their translations into French
{-}
-
Colloquial
-
Official
Unplug battery temperature sensor from the MultiPlus.
The MultiPlus is suitable for wall mounting.
MultiPlus in inverter mode Defective fuse F3 see appendix A.
The MultiPlus synchronises within this range with the AC input frequency.
Note: the MultiPlus is not suitable for 3-phase delta(Δ) configuration.
The MultiPlus will then respond less quickly to AC input voltage deviations.
Parallel Connection The MultiPlus can be connected in parallel with several identical devices.
The load on AC-out-2 is disconnected immediately when the MultiPlus switches to battery operation.
In order to put the MultiPlus in this state, the procedure below should be followed.
mains cable must be connected to the MultiPlus with the aid of a three-wire cable.
Programmable relay The MultiPlus is equipped with a programmable relay that by default is set as an alarm relay.
The MultiPlus will prevent overload of a limited AC source,
Recommendation: Turn the UPS feature off if the MultiPlus fails to synchronise
In the event of mains failure, the MultiPlus isolates the premises from the mains,
Programmable relay The MultiPlus is equipped with a multi-functional relay that by default is programmed as an alarm relay.
The mains input& output terminal connector can be found on the bottom of the MultiPlus Compact, see appendix A.
In Forced Absorption mode, the MultiPlus will charge at the normal absorption voltage level during the set maximum absorption time.
Victron Energy's Multigrid is a special version of the MultiPlus charger/converter and specially-developed for mains-linked battery storage systems.
If the switch is has not been moved, the MultiPlus will remain in‘charger only' mode
only the battery charger of the MultiPlus will operate if mains voltage is present.