Examples of using Pressure sensor in English and their translations into French
{-}
-
Colloquial
-
Official
This Sonicare comes with the Pressure Sensor feature activated.
The X8I utilizes the signal from a 4-20 ma pressure sensor that is mounted remotely from the X8I in a suitable location in the compressed air system.
The system pressure sensor(P) must be located where it will see the air pressure that is common to all of the compressors.
The pressure sensor uses a piezo-electrical signal convert,
The engine is equipped with a low oil pressure sensor that shuts down the engine automatically when the oil pressure drops below 5 psi.
A pressure sensor placed at the bottom of the water measures the height of the water column by the pressure which is applied above it.
Further to the characteristics of the standard version it is also available an electronic circuit equipped with an air pressure sensor.
Combined pressure sensor for sludge pumping measurement at the inlet of the equipment to control the filtering process.
Incorrect manipulation of the correction value of the pressure sensor will result in false altitude readings!
For purchase of a tire pressure sensor and registration of the tire pressure sensor ID signal code, consult an Authorized Mazda Dealer.
Periodically check the operation of the pressure sensor by pressing moderately on the brush head during use.
Be sure to register the tire pressure sensor ID signal code whenever tires
The pressure sensor on the shelves sends a message to the computer telling its product has been consumed.
check the type and range of the sensor and carry out the pressure sensor commissioning and calibration procedure.
Note: In«Tongue Cleaning» mode the pressure sensor is turned off.
a low-level switch, a pressure sensor and a check valve.
The device comprises a highly flexible, durable, disposable and cost effective pressure sensor augmented with measuring electronics
Based on Oscillometric methodology and silicon integrated pressure sensor, blood pressure
Mandatory criterion M12 required the radiosonde to be equipped with a pressure sensor that measured over the complete range from 1050 hPa to 3 hPa.
A second alternative to a traditional flow switch is a pressure sensor mounted in the water inlet pipe.
