Examples of using Test button in English and their translations into French
{-}
-
Colloquial
-
Official
Press the Test Button again to confirm it was activated.
There is no such Test button for components.
It stops when you release the test button.
You can abort the test any moment by releasing the Test button.
Condensate discharge only when test button is being pressed.
Printing a test page- press the test button once.
Printing the parameter list- press the test button twice.
No need to press the test button.
click the Test button to verify that the software can contact the server.
NOTE: If the test button is held for 5 seconds
Press the test button(item 06)
Initiate test by pressing the test button for 5 seconds(min.),
In Wireless Master Mode pressing the test button will fire slave flashes on the same channel being controlled by the Master flash.
Press the Test button on the smoke alarm(1) until the alarm emits an audio signal.
When pushed, the test button shorts from collector voltage to ground.
press down once again the Test button to reinitialize the EGFPD,
Hold the unit where you intend to place it and press the GSM test button.
The EGFPD can be reinitialized either by pressing down the Test button or by disconnecting the thermostat at the electrical panel.
Press and release the Test button on the door sensor until the Wi-Fi hub beeps and the light fl ashes.
is a false alarm, can you then silence the alarm using the test button.