Examples of using Bottom surface in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
With this in mind, you should take into account that the bottom surface will be rougher than the rest of your model.
you can see the traces of the stirring[done by fingers] on the bottom surface of the abalone shell," Henshilwood said.
the sensor is in contact with the bottom surface of the upper plate of the liner.
The top surface is covered with grey mineral chipping and the bottom surface is covered from thin polyethylene film suitable for the use of blow torch.
of the Bristol Aeroplane Company developed an aileron shape that is pivoted at about its 25 to 30% chord line and near its bottom surface, in order to decrease stick forces as aircraft became faster during the 1930s.
Thus, through the combination of the A-axis and the C-axis, the workpieces fixed on the table can be machined by the vertical spindle except for the bottom surface.
the sound wave is scattered by the bottom surface, and the probe cannot receive the bottom wave signal.
same kind of brush, and use a number zero sandpaper pad under the brush to turn the handwheel several times to make electricity The bottom surface of the brush is polished
Edges of the blade are protected by rubber rails.- Top and bottom surfaces of the blade are protected by rubber.
while two rows of teeth arranged at different angles provide tear-free cuts at the top and bottom surfaces.
bonded to bottom surfaces, top surface usually bonded an antistatic layer,
write operations using the read/write heads mounted on the top and bottom surfaces of each platter it is obviously,
Bottom surface of AAO.
This change occurs mostly at the bottom surface.
The bottom surface is flat and it integrates a fixation element.
Meier says that the efflux looks like it comes out of a hatched grating of very heavy metal mesh inside the circular bottom surface.
To create a pond dug pit with a bottom surface and shores are removed stones
so that brush bottom surface grinding, good contact,
Hold the disc by the edges without touching the top or bottom surfaces.
The bouncing surface, bottom are made from industrial strength 0.55mm PVC.