Examples of using Bottom surface in English and their translations into Spanish
{-}
-
Official
-
Colloquial
ensure that the pad is flat against the bottom surface and secured tightly.
in no way affect the bottom surface or roller ring wheels.
cabinet the hob must be fitted with a horizontal plate 20 mm away from the worktop‘s bottom surface.
The burr of the bottom surface of the workpiece is remarkably reduced,
If the drill tip breaks through the bottom surface without a supporting plate to guide the tip,
Adjust so flat beater just clears bottom surface of bowl when in lifted position by turning screw(A)
The latter have some little balls instead of terminals on the bottom surface which, once welded,
halfway between the bottom surface and the top level of the contents.
If your cooktop grates do not have rubber bumpers on their bottom surface and your oven racks are coated with black porcelain,
as is away from the bottom surface of the water in the lower layers does not occur absorption of oxygen from the atmosphere.
the bone is roughly pentagonal; the bottom surface bears two ridges near the front, as well as
If the bottom surface of the pond or waterfall is dirty,
Alignment can be achieved by placing a straight edge across the top of the sheaves making sure that it is level and measuring down to the bottom surface of both sheaves at four points.
in figure 5 and adjust the holder(B) until its bottom surface contacts the work bench surface. .
If your grates do not have rubber bumpers on their bottom surface, they may be cleaned in the oven using the self-clean cycle.
may be removed entirely(for wall-mounting the bar) or moved along the bottom surface of the bar, depending upon your installation.
be sure that the bottom surface of the grinding wheel is inside the guard lip.
relationship between geographical distributions, bottom surface and sea currents, relationship with interannual ice coverage and others.
locate boards so the bottom surface of the boards are 84 inches(213 cm)
metal bracket) into threaded holes in SPEAKER BRACKET- only so ends of screws are flush with bottom surface of speaker bracket.