Examples of using Oxide layer in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
a thick(500 nm) oxide layer was deposited onto the glass substrate.
Since the process takes place under absolutely controlled conditions, this oxide layer is really compact and hard.
the thicker the oxide layer that is achieved.
This process is carried out under strictly controlled conditions, resulting in an extremely consistent and hard oxide layer….
Molybdenum oxidizes readily at temperatures in excess of 760°C. When exposed to air at this temperature, an oxide layer sublimes as the base metal reacts with oxygen, resulting in an oxidation process that resembles smoke.
By applying a charge to the always-on floating gate, excited electrons are forced through the oxide layer to create a barrier of negatively-charged electrons between the control gate and the floating gate.
a substrate or a surface oxide layer, oil, dust,
remove the oxide layer and impurities in the steel plate surface,
the surface oxide layer is mainly CuO and BeO, using 10% of the HNO3
works on all classes of semiconductors without requiring an oxide layer.
brazed tungsten the surface oxide layer, if long-term placement will produce automotive electrical failure phenomenon tungsten copper alloy rod to ensure that the contact has good electrical conductivity,
Broad range The fact that the protective aluminum oxide layer is not incorporated on the outside,
The fact that the protective aluminum oxide layer is not added to the outer side,
The reason is that this treatment changes the type of surface oxide to a surface oxide similar to that formed on pure chromium metal, but this oxide layer is very thin,
The researchers claim that fact that the protective aluminum oxide layer is not incorporated on the outside,
The thin stainless steel tip penetrates insulation and oxide layers.
Surface treatments such as oxide layers.
Thin oxide layers can be accepted.
The researchers dissolve metals in liquid metal to create very thin oxide layers, which previously did not exist as layered structures
boundary layer formation, oxide layers and fouling.