Examples of using Lower edge in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
The lower edge of the drop symbology must be at the same horizontal level as the wall profile.
To the lower edge of the ramp to organize the run-off,
in time it should be before the lower edge of the ball touches the ground.
On the other side of the mountain chain, which forms the lower edge of the La Plagne High stations, you can find the southern-most station of the skiing region Paradiski: Champagny-en-Vanoise.
the rod can be omitted and the lower edge.
Most paddle blades are slightly asymmetrical, meaning that the upper edge of the blade is longer that the lower edge.
so their alignment recommended pull rope so that the lower edge of the hanging roof 7 cm.
is below the lower edge of any opening through which progressive flooding can take place.
During dose of 0.25 ml at a time when the inner surface of the syringe piston reaches the lower edge of the needle retainer its movement to be stopped.
Hotfix 932866 FIX: The right edge or the lower edge of an exclusionary clipping region can be drawn in a GDI+ application on a computer that is running Windows XP, Windows Server 2003, or Windows Vista.
an elevator takes visitors down 45 meters to tunnels with viewing portals behind the falls and an observation deck near the lower edge of the falls.
If the upper or lower edge of the text area is touched while marking,& konsole; scrolls up
The amount of radiators mounted underneath the window depends on the distance from the floor windowsill- the lower edge of the heater must be at least 10 cm above the floor,
a limited number of VGN-CS1, CS2 and CS3 Series models might develop horizontal lines at the upper or lower edge of the display, as shown in the examples below.
it was" a common belief that if the lower edge of a woman's skirt has become turned up
also cut through the right corner of the lower jaw and its lower edge.
The lower edges should be bent in the direction of the cut to get a common horizontal.
The design of the headlights has been updated: their lower edges have acquired a slight wave-like bend;
Low edges allow you to put
Po lower edges of the box to remove the excess part of the profile, which serves as