Examples of using Voltmeter in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
Measurements voltmeter between the phase and neutral conductor,
and a DC voltmeter are required.
A high internal resistance voltmeter with internal resistance greater than 2000 ohms/volt should be used.
test with a non contact voltage detector or voltmeter to verify that there is no power before proceeding any further.
With modern semiconductor components, a voltmeter with an input resistance of up to 1017 Ω can be built with little difficulty.
The extremely high resistance of the measurement electrode's glass membrane mandates the use of a voltmeter with extremely high internal resistance, or a null-balance voltmeter, to measure the voltage.
Full information on the operation of the generator and the battery can be obtained by equipping the car with an ammeter and a voltmeter.
The terminal A1 is connected to one end of the secondary winding, and a voltmeter is connected between A2
and thus the voltmeter will read the subtractive polarity.
Obviously, a skilled technician can circumvent this by indirect measurement using an accurate constant low current source and a voltmeter, but it is a solution that cannot be described as user-friendly.
even digital voltmeter has much too low of an internal resistance to measure voltage in such a high-resistance circuit.
If this does not cause the voltmeter pointer to return to the"0" line,
The voltmeter is a device used to measure the tension(or electric potential difference)
The voltmeter also allows you to keep this process under the control of the driver,
which, besides offering the voltmeter function, has at least a converter voltage to operate in ammeter
When you put a voltmeter across the leads of a battery,
The voltmeter is a device used to measure the tension(or electric potential difference) between two points.
for those of you who don't have a voltmeter or are uncomfortable testing voltage,
Connect a voltmeter(which has sufficient range to indicate the battery voltage)
In addition there is a voltmeter(parallel to the resistor) and an ammeter(in series