Examples of using Voltmeter in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Periodically remove one DC plug and check the Digital LED Voltmeter to determine when charging is complete usually 13.5V is considered fully charged.
If voltmeter indicates +11 to +12.6 volts DC for any of the valves,
If the voltmeter does not indicate +11 to +12.6 volts DC,
page 3) or a voltmeter see fig. 1.6, page 3.
tester to the battery, it functions as a voltmeter until you press the ENTER button to start the test.
The Mini OLED(organic light-emitting diode) DC Voltmeter monitors 12V and 24V systems with
If voltmeter reads battery voltage,
This three-color, 20-LED bargraph is an accurate, self-checking AC voltmeter that continually measures input AC voltage.
Standard“average-reading” AC voltmeter used to measure output voltage,
Voltmeter will measure the EMF generated
The measurment could be done by accurate digital voltmeter(analog ones are not accurate enough).
Voltmeter Reading State of Charge Charging Time 12.7 100% Full Charge 12.4 75% 90 Min.
If the battery voltmeter drops below 11 volts while the inverter is attempting to start the motor,
The Digital LED Voltmeter provides the user with the current charge state of the internal battery.
The Onboard Diagnostic Voltmeter attaches easily to the battery
The first digital voltmeter was invented
The correct indication on voltmeter is 0 volts DC when“E” valve is not energized.
Connect the second clip to the galvanized nail and the remaining lead of the voltmeter.
is located to the left of the Battery Status meter voltmeter.
At the moment of engine ignition, the voltmeter needle may momentarily drop to 8V.