LAYER THICKNESS in Indonesian translation

• ketebalan lapisan

Examples of using Layer thickness in English and their translations into Indonesian

Copper Layer Thickness.
Ketebalan lapisan tembaga.

(mm) Carbon layer thickness.
( mm) Ketebalan lapisan karbon.

The Zinc layer thickness test.
Zinc lapisan ujian ketebalan.

Maximum layer thickness- 5 cm;
Ketebalan lapisan maksimum- 5 cm;

Mm carbon layer thickness carbon filter.
Mm lapisan karbon ketebalan filter karbon.

Layer thickness and defect height measurement;
Ketebalan lapisan dan pengukuran ketinggian cacat;

Paint layer thickness 5um~40um, Customized.
Ketebalan lapisan cat 5 um~ 40 um, Disesuaikan.

Each layer thickness can be adjusted freely;
Setiap ketebalan lapisan dapat disesuaikan secara bebas;

A minimum layer thickness of 80μm is recommended.
Ketebalan lapisan minimum 80 μm direkomendasikan.

And each layer thickness can be adjusted freely.
Dan ketebalan lapisan masing-masing dapat disesuaikan dengan bebas.

Lifespan depends on the environment and layer thickness.
Umur pakai tergantung pada lingkungan dan ketebalan lapisan.

LVT Tile Thickenss, wear layer thickness, dimensions.
LVT Tile Thickenss, ketebalan lapisan aus, dimensi.

The layer thickness is determined by the desired effect.
Ketebalan lapisan ditentukan oleh efek yang diinginkan.

Measuring zinc layer thickness is necessary process before shipment.
Mengukur ketebalan lapisan seng adalah proses yang diperlukan sebelum pengiriman.

Mm carbon layer thickness carbon air filter for grow room.
Mm lapisan karbon ketebalan filter udara karbon untuk ruang tumbuh.

(5) Choose a cover layer thickness up to 9mm.
( 5) Pilih ketebalan lapisan penutup hingga 9 mm.

The outer layer thickness is take about 10%-15%, very thin.
Ketebalan lapisan luarnya sekitar 10%- 15%, sangat tipis.

What is precision/ single layer thickness of NOULEI 3D modeling machine?
Apa yang presisi/ ketebalan lapisan tunggal mesin modeling NOULEI 3 D?

Solvent-based adhesives may lose up to 50-70% of layer thickness during drying.
Perekat berbasis pelarut bisa kehilangan sampai 50- 70% ketebalan lapisan selama pengeringan.

The smaller the layer thickness, the less the strength of the floors;
Ketebalan lapisan yang lebih kecil, semakin kurang kekuatan lantai;