LAYER THICKNESS in Slovenian translation

• debelina plasti
• debelino sloja
• debelino plasti
• debelina sloja

Examples of using Layer thickness in English and their translations into Slovenian

the application of an anti-stain primer with 175 µm layer thickness in a single spray coating is sufficient.
je dovolj nanos temeljnega premaza proti madežem z debelino sloja 175 µm v enem premazu s pršilom.

geotextiles are poured with rubble with a layer thickness of 10 cm and the blind area
se geotekstili izlivajo z ruševinami z debelino plasti 10 cm, slepi predel okoli hiše

on the entire lower surface of the lining element with a layer thickness of 1-3 mm.
na celotno spodnjo površino obloge s debelino sloja 1-3 mm.

sprinkle the surface of the hole with compost or peat(layer thickness of 10-15 centimeters).
potresemo površino luknje s kompostom ali šoto(debelina plasti 10-15 centimetrov).

large crushed stone with a layer thickness of 20 centimeters, to subsequently provide the plant with good drainage.
velik drobljen kamen s debelino plasti 20 centimetrov, da bi nato napravi zagotovili dobro drenažo.

A coating with two layers of ANTISTAIN AQUA 2901 for a layer thickness of 200 µm is therefore recommended for hardwoods.
Za trde vrste lesa zato priporočamo premaz z dvema slojema premaza ANTISTAIN AQUA 2901 za debelino sloja 200 µm.

With this layer thickness, the structure of the wall consisting of stones
S to debelino plasti je v celoti kompenzirana struktura stene,

the technological regulation assumes a layer thickness of up to 3.5 mm.
tehnološki predpisi prevzemajo debelino sloja do 3,5 mm.

Plasters of this type will require 3.5- 4 kg per 1 square with a layer thickness of 50 mm.
Za omete te vrste je potrebnih 3,5- 4 kg na 1 kvadrat z debelino plasti 50 mm.

It is a quasi-two-dimensional material with only one atomic layer thickness, so it is also called monatomic layer graphite.
Je kvazi dvodimenzionalni material z le eno atomsko plastjo debeline, zato ga imenujemo tudi monatomski sloj grafita.

With a layer thickness of 7 mm, you need 70 liters of water(1l* 7 mm* 10 square meters).
Pri debelini plasti 7 mm potrebujete 70 litrov vode(1l* 7 mm* 10 kvadratnih metrov).

also the equivalent bearing capacity of the product in smaller embedded layer thickness is questionable.
vprašljiva je tudi nakazana ekvivalentna nosilnost produkta pri manjši vgrajeni debelini plasti.

The solvent in a mixture of any kind is liquid, but the rule for adjusting the layer thickness should be followed- use an alcohol solvent.
Topilo v poljubni zmesi je tekoče, vendar je treba upoštevati pravilo za nastavitev debeline plasti- uporabite alkoholno topilo.

Make constricting layer thickness 17 See irrationally- in the first place,
Nerazumno je, da bi sloj debelejši od 17 cm- najprej zaradi visokih stroškov,

coarse sand(layer thickness is about 2 cm).
grobim peskom(debelina plasti je približno 2 cm).

passivating layers where layer thickness is more important than high resolution.
passivating plasti, pri čemer debelina plasti je bolj pomembno kot visoke ločljivosti.

whereby layer thickness is more important than high resolution.
passivating plasti, pri čemer debelina plasti je bolj pomembno kot visoke ločljivosti.

other organic material, and the layer thickness should be about 10 mm.
drugim organskim materialom, debelina plasti pa mora biti približno 10 mm.

The Voltcraft SDM 115 is a layer thickness tester that measures and indicates the thickness of non-magnetic coatings such as lacquers,
Voltcraft SDM 115 je tester debeline slojev, ki meri in na svojem prikazovalniku prikazuje debelino nemagnetnih premazov kot so laki,

drying rate, layer thickness).
hitrost sušenja, debelina nanosa).