Examples of using Absorption coefficient in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
even water reflect almost all of the incident energy(the absorption coefficient is close to zero).
driven towards the glass diffuser through a transparent pipe with a very low absorption coefficient.
The slope of this linear regression corresponds to the wall absorption coefficient, which is greater in roadways with bare rock walls or concrete linings than in those with arch supports.
the high-voltage winding insulation, the absorption ratio(also called absorption coefficient k) should also be measured.
Absorption coefficient to take the amount of this product, accurately weighed, dissolved in methanol and made into 15μg per 1ml of solution, according to spectrophotometry(Appendix IVA), measured at 271nm wavelength absorbance, absorption coefficient(E1% 1cm)
solution for areas of facilities dedicated to conventional training and competition because it guarantees a shock absorption coefficient of 39% and meets IAAF performance criteria.
the surface is acceptable only if its sound absorption coefficient, α, is<
voids content or sound absorption coefficient have been measured
μ= nσ is the absorption coefficient, measured in cm-1,
Materials having absorption coefficients less than 0.15 are considered to be.
Absorption coefficients in octave bands(ISO 354).
Absorption coefficients a as a function of frequency[1].
Different materials have different absorption coefficients.
Features: Ultrbroadband gain bandwidth; High absorption coefficients; High conversion efficiency.
When absorption coefficients tend to 1(as happens in completely absorbent anechoic rooms)
These semiconductors are especially attractive for solar applications because of their high optical absorption coefficients and versatile optical and electrical characteristics, which can in principle be manipulated
measured raw opacity signal, and of the unfiltered and filtered light absorption coefficients(k-value) of the first load step of an ELR-Test are shown,
surface absorption coefficients- the latter may be approximated by theoretical values.•The results may be sound pressure levels at certain points,
Sound absorption coefficient.
Light absorption coefficient.