Examples of using Flowrate in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
the rotameter float assumes a distinct position for every constant flowrate.
With 3% foam compound, foam compound suctioning flowrate up to 100 it./min.
position, flowrate, etc.
Wide flowrate ranging from 30 to 3000 m3/ h with one single filter housing.
Top Description The FPR-200 series flowrate sensor integrates rugged tangential turbine technology with a precision digital-to-analog conversion circuit hermetically encapsulated within the body of the sensor.
Top Description The FL-7000A Series of General purpose flowmeters is designed to provide economical, accurate flowrate indication for oil and water.
directly proportional to the flowrate.
LCD provides stable flowrate readings in feet per second
LCD provides stable flowrate readings in feet(or meters) per second.
the spring-and-piston combination determines the flowrate, and the fittings and materials of construction must be chosen so as to satisfy the demands of the applications.
the FMA5400A/5500A provides measurement of direct gas mass flowrate, without the need to compensate for variations in gas temperature
Required values such as pressure, volume, flowrate, temperature, mass and other parameters can be
while the value of the fan minimum air flowrate will be derived from the chart.
Icarus is available in three sizes with flowrate from 600 to 2.000 m3/h with different filtration efficiency combination, up to performances of 99,97%.
pockets, self-sealing nozzle with high flowrate and precise modulation through silicone valve.
since velocity profiles change with flowrate, viscosity, temperature,
Portable medium expansion foam making branchpipe M type,(to be used combined with the Z 2 type self-priming inline premixer),- premix flowrate 200 to 800 lt/min at 2,5 bar,- expansion rate ca.
Portable low expansion foam making branchpipe LS type,(to be used combined with the Z 2 type self-priming inline premixer),- premix flowrate 200 to 800 lt/min at 5 bar,- expansion rate ca.
It is also evident that the cooling rate depends primarily on the flowrate and the temperature of the product centre on exit from the machine depends chiefly on the product travel speed i.e. on the duration of water cooling.
The flowrate converter generates the current supplying the coil,