Examples of using Ignition source in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
At the Flash point the vapor may be burn when the ignition source is removed.
a high dust concentration offers the potential for a dust explosion if an ignition source is present.
Move stove to a well-ventilated area away from any ignition source to locate and stop the leak.
is dependent on the size of the ignition source and the properties of the materials
The potential for dust explosion exists when high concentrations of dust come into contact with an ignition source.
The flash point here will vary according to the distance between the substance and the ignition source- the height of the source above the cup.
and they find an ignition source.
upholstered bed bases or mattress pads when subjected to a gas flame as an ignition source.
Further details on the various types of ignition source and their assessment can be found in EN 1127-1.
To lay down effective precautions, one must know the various types of ignition source and the ways in which they operate.
mixed with air, an ignition source can cause an explosion.
water do not react without an ignition source. They will say no.
mixed with air and an ignition source can cause an explosion.
The lid is sealed and the ignition source is introduced into the vessel itself,
Safety interlocks are sometimes used to ensure the presence of an ignition source before the main valves open;
The semi-automatic Pensky-Martens closed-cup tester measures the flash point at the lowest temperature at which the application of an ignition source causes the vapors of a sample to ignite.
Presence of an ignition source, which is a source of energy strong enough to ignite the combustible: this can be
The temperature of the substance is gradually raised and an ignition source is passed over the top of it, until it reaches
it is necessary to introduce an ignition source to the substance and wait for the“flash”- the point at which it is able to be ignited.
Thus the explosion can occur only in the presence of an ignition source and when the concentration is within the explosive range of the substances, i.e.