Examples of using Ignition source in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Neither flash point nor fire point depends directly on the ignition source temperature, but ignition source temperature is far higher than either the flash or fire point.
Dust accumulation from this product can present an explosion hazard in the presence of an ignition source.
ANSI standards for equipment that will not create an ignition source in explosive environments.
mixed with air and an ignition source can cause an explosion.
Electrical and non-electrical equipment used in potentially explosive atmospheres must be designed in such a way that it cannot become an ignition source.
which came into contact with an ignition source.
thus contributing to ecosystem flammability- the susceptibility to burn in the presence of an ignition source.
mixed with air, an ignition source can cause an explosion.
The semi-automatic Pensky-Martens closed-cup tester measures the flash point at the lowest temperature at which the application of an ignition source causes the vapors of a sample to ignite.
the four basic elements of which are:* A fuel system* A combustion chamber* An ignition source* A barrelIn order to fire,
and triggers the ignition source often using a piezoelectric barbecue igniter.
Possible ignition sources.
Are there any ignition sources in hazardous areas(e.g. in the heating system)?
Eliminate all ignition sources.
Shut off ignition sources, prohibit flares and flames in the area.
open flame and other ignition sources.
heat and other ignition sources.
Removal of ignition sources, provision for sufficient ventilation/respiratory protection, control of dust,
By using our Exolit® products in potential ignition sources, like electrical systems
Fires are far less likely to start from small flames or electrical faults, if materials resist these ignition sources.