Examples of using Positive terminal in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
Connect the other end of the positive lead to the positive terminal -2- of the boosting battery-B-.
The carbon atoms with triple positive charge further accelerate away from the positive terminal and pass through another set of focusing devices where mass analysis occurs.
Push down on the first positive terminal and insert the stripped end of the second piece of blue(positive) wire.
Connect the other end of the red lead to the positive terminal(red cover)
Then the positive terminal on the enclosure is connected to the positive terminal on the amplifier.
insert it into the second positive terminal.
then disconnecting the positive terminal of the battery.
Switching potential input has directivity, you should connect the common end with the positive terminal of potential, and connecting the input end with negative terminal of potential for ensuring the potential of common end is higher than the one of input end.
with the flat side(case) as the positive terminal(cathode) and the rounded side as the negative terminal(anode).
an injection magnet before reaching the tandem accelerator where they are accelerated to the positive terminal by a voltage difference of two million volts.
it's enough to remember that the positive terminal is a little bit longer than the other.
negative terminal of the capacitor(marked with the white stripe) is always at a lower voltage than the positive terminal and that the voltage across the capacitor doesn't exceed the capacitor's voltage rating.
Connect the positive terminals of both batteries with the jump lead.
Connecting the positive terminals with the positive lead(red).
Hydraulic ram clutch(+) Clutch(+) Connect the POSITIVE terminal of the hydraulic ram's clutch to the course computer's POSITIVE clutch terminal.
There must be no contact between the two Audi Q5s as otherwise current could flow as soon as the positive terminals are connected.
Do not allow metallic materials to simultaneously contact negative and positive terminals of cells and batteries.
There must be no contact between the two vehicles as otherwise current could flow as soon as the positive terminals are connected and the boosting battery could be discharged.
Connect that to the positive terminal.
The cathode(positive terminal) accepts the electrons thus completing a path of electrons' flow.