Examples of using Stator in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Conventional motor starting devicesinclude auto-transformer, capacitor, rotor/ stator R or X, Y/Δ, partial winding, etc.
In fact, the stator/rotor system is only about 10% efficient compared to commercial motors which are usually over 90.
If you're considering a permanent magnet DC generator then the inductor is going to be found at the stator with a range of permanent magnets.
The shape of the rotor and stator can be selected from conventional shape, 6 liter shape, and trick shape.
When as exposure is called for, stator power is applied so the tube anode comes up to a rotation speed revolutions per minute.
After use the machine to wind their fan ventilator 4poles motor stator, they found this 4 needle winder is.
The armature parts of electrical machine: cover plate, slot wedge, stator gasket, shims, carbon brush etc.
Adopt stainless steel screw and rubber stator, permanent magnet brushless motor.
All new stator design offers smooth acceleration both on- and off-road racings.
Turbo molecular pumps consist of moving and stator blades arranged on multiple levels.
WIND-1-TSM as your stator insulation cap interfre the machine place bridge wire automatically.
ND-S4W01 Four stations BLDC stator needle winding machine for brushless motor stator coil winding.
Pump body is filled with epoxy resin, no water leak into stator, a temperature.
It take around 4 to 5 minutes to wind one stator by one winding head.
This system features automatic winding and stator handling, downloaded specifications and simple quick lamination tooling changeovers.
Winding diagram of stator should be changed to compliant with machine(now it is produce by hand).
When the viscosity gets too high, a Dissolver or Rotor/Stator system cannot get enough shear force into the system.
Ø3mm~~Ø8mm 24.3KW Wire Bending Machine for winding BLDC stator.
Advanced equipments: Automatic winding machine, stator automatic setting machine, end cover automatic setting machine, automatic soldering machine, etc.
This system features automatic winding and stator handling, downloaded specification and simple quick lamination tooling changeover.