Examples of using Stator in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Stationary stator, also consisting of magnets,
copper are situated in the stator.
It is the relative motion between the stator and the translator in the generator which causes voltage to be induced in the stator windings.
SSM consists of a rotor(left) and a stator(right) on which piezoelectric elements are mounted.
The stator windings are cooled by water flowing within stainless steel tubes embedded in the Roebel(stator) bars.
Once assembled, they form the laminated cores of transformers or the stator and rotor parts of electric motors.
SCT also shortens the maintenance time on the rotor and stator by up to 85%.
The flux generated in the stator interacts with the rotor flux,
RDSSM consists of a rotor(left) and a stator(right) on which piezoelectric elements are mounted.
All of these scenarios lead to extremely high currents in the rotor and stator, which means that both heat up very rapidly.
Cutting motor case and stator, and finally separate copper from stator wihtin 20~30 seconds for full operation.
The fixed coil windings are used to generate magnetic fields dynamically at two or more positions around the stator.
The air gaps between the rotor disc and the stator are less than 1 mm wide.
rotor rubs with stator when motor is running.
Conical Refiner has a couple of rotor and stator in the pulping chamber, with special toothed bars, echelonment stairs.
reduce the rejection rate of the stator during transport.
the rotor might touch the stator.
a kind of DC motor stator magnet.
makes retensioning the stator a simple, few minute process.
Reprogrammable lock latches CS-RPR are supplied non-programmed with the rotor positioned in line with the index marked on the stator front surface.